Would you like to explore our corporate site or visit your local website?

Stay on Corporate site

Would you like to browse the solutions available in your area and the local contact information? Please go to your local website.

Your suggested website is

We couldn't determine a local website for you

Go to your suggested website

Back to top

Our environmental responsibility covers the full life cycle of our products, from design and manufacturing to maintenance, modernization, and end-of-life treatment. We carried out a life cycle impact assessment in accordance with the ISO 14040 standard, which showed that our greatest environmental impact stems from the energy consumed by our products during their operational lifetime.

Our commitment to energy efficiency means we are successfully reducing the environmental impact of our products during their life cycle.

Our product life cycle

KONE MONOSPACE® ELEVATOR

Life cycle stage

Life Cycle Assessment (LCA) data from studies carried out in compliance with the ISO 14040-44 standards illustrate the total environmental impact of each life cycle stage. The assessment is based on the KONE MonoSpace® elevator, with a rated load of 630 kg, a speed of 1 m/s, an estimated lifetime of 25 years, and a frequency of 150,000 starts per year traveling between five floors.

KONE TRAVELMASTER™ 110 ESCALATOR

Life cycle stage, LCIA values (EI99)

The assessment is based on the KONE TravelMaster™ 110 escalator, with an equivalent step load of 25 kg, an estimated lifetime of 15 years, operating 14 hours per day, 6 days per week, and 52 weeks per year.

KONE SLIDING DOOR 30


Life cycle analysis

The assessment is done for KONE Sliding Door 30 with dimensions of outer frame of door panels 780 x 2250 mm, and side panels 750 x 2225 mm, mass including packaging 272.08 kg. Estimated lifetime of the product is 15 years.

The full life cycle analysis results for this and other doors solutions can be found in Environmental Product Declarations based on the Product Category Rules: automatic doors, automatic gates, and revolving door systems. Independent verification of the declarations is conducted in accordance to ISO 14025.